If you are want to know when it is time to have a brake job done, you want to know how to revise your brakes for problems. When inspecting your brakes and suspension, you want to look for problems like uneven tire wear, damaged parts, and wear of the brake pads. You will also want to test the resistance when you press the brake pedals and the alignment when you drive. The following 5-point checklist will help you revise your brakes and suspension to know when you need a brake job or other repairs:
1. Check the Tire Treads to Know When It Is Time for New Rubber and Look for Uneven Wear That Is A Sign of Other Problems
To start with the brake and suspension inspection, you will want to look at the treads of your tires. First, look for worn tires that need to be changed to ensure your car is safe to drive. When inspecting the treads, look for signs of uneven wear like smooth treads at the edge of the tire wall, which can mean that there is a serious problem with your suspension alignment or the brakes.
2. Test Drive Your Car to Check the Pedals and See If Alignment Problems Are Due to Suspension and Brake Problems
Next, you will want to test drive your car to look for problems like loose brake pedals or pulling in one direction when you apply the brakes to come to a stop. If you have noticed these problems or hear noises like squeaking when you come to a stop, it is a sign that you need to visit the brake shop for repairs.
3. Check the Level of Brake Fluid in The Master Cylinder and Look for Problems with Leaks and Damaged Brake Lines
The brake master cylinder is the hydraulic system that operates the brakes of your car, and if it is low on fluid, your brakes will not work properly. Therefore, you want to check the brake fluid level and add fluid if it is low. If the fluid was low, this is a sign that there is a leak somewhere and you should take your car to a brake service for repairs.
4. Inspect the Brake Pads to See If There Is Still Material or If They Are Getting Down to The Metal and Need to Be Changed
The brake pads are the most important components for your car's brake system, and they need to be routinely changed. Check the material on the pads to make sure that they are not getting close to the metal. If the pads are getting worn, it is time to have them changed before they cause problems with metal on metal damage to the drums or disks that can be costly to repair.
5. Listen for Noises and Check Disks or Drums for Signs of Severe Problems That Mean You Need Urgent Brake Repairs
Lastly, you should be aware of problems like loud noises, poor brake response, and hard pulling in one direction when you apply the brakes. These are all signs of serious brake problems that you will want to have checked out by a professional brake service.
These are some of the things that you will want to check when you are revising your brakes and suspension. Problems with the suspension can mean there is a problem with the brakes or could cause damage to the brakes, so all these points are important. If you have found problems with your brakes or suspension, contact a brake service to have the brake pads changed and other repairs are done before they get worse.
Share